Skip to end of banner
Go to start of banner

Package Upgrade - Connector for Dynamics

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Current »

Below is a step-by-step instructions on installing the eSAW connector package upgrade via zip file.

Open Advanced Settings option

Figure

Description

  1. Click the gear Icon

  2. Click "Advanced Settings"

Open Solutions list

Depending on your Dynamics instance, the procedure to access the "Solutions list" may vary. Here is the standard procedure:

Figure

Description

  1. Click "Settings" drop down

  2. Click "Solutions"

If you are using a newer version of Dynamics, you may need to follow a different procedure to access the "Classic Solutions interface":

Figure

Description

image-20241112-085722.png

  1. Click "Solutions", so a new tab should open. Look at next step of the procedure

Figure

Description

image-20241112-085734.png

  1. Click "…" for more commands

  2. Click “Switch to classic“

Import the package

Figure

Description

  1. Click the "Import" button to import the package

  2. Click on "Choose file" and select the solution zip file

  3. Click "Next"

Proceed with the upgrade

Figure

Description

image-20241111-105615.png

  1. Click on "Next"

Figure

Description

  1. Verify the selection of the predefined and recommend option "Upgrade"

  2. Verify the selection of the predefined and recommend option "Maintain customizations"

  3. Click on "Import"

Wait until the end of the installation process

Figure

Description

Wait without closing the opened browser windows

Close import log window

Figure

Description

  1. Click "Close"

  • No labels