<AdhocWorkstepConfiguration>
  <!--A label for this workstep-->
  <WorkstepLabel>workstepLabel</WorkstepLabel>
  <!--Defines a image generation correction factor. If for example this document contains very small text, which might not be readable with the standard image resolution of the client, this factor can be used to tell the client to get a higher resolution.-->
  <SmallTextZoomFactorPercent>100</SmallTextZoomFactorPercent>
  <!--Defines the time to live of all the documents created by the workstep. After this time to live is expired, all documents are deleted. '0' sets the time to live to forever.-->
  <WorkstepTimeToLiveInMinutes>10</WorkstepTimeToLiveInMinutes>
  <!--Configure the actions done by the server and the by the clients when the workstep is finished.-->
  <FinishAction>
    <!--Configure the action done by the server when the workstep is finished.-->
    <!--Attribute 'callSynchronous' wether the server should call that action before returning to the client which called FinishWorkstep. Possible values: '1' the server does not return until the action is completed. This may cause long waiting times for the client in case of timeouts or other errors, '0' the server returns to the client and calls the action afterwards. This may cause problems if the client finish action depends on the server finish action to be already completed-->
    <ServerAction callSynchronous="0">http://www.google.at</ServerAction>
    <!--A client action specifies the behavior of a specific client after a workstep is finished.-->
    <!--'clientName': defines which client should implement this behavior. Predefined client names are: 'SIGNificant WSI', 'SIGNificant iPadApp' and 'SIGNificant AndroidApp'. Any additional client name can be defined by the user.-->
    <!--'closeApp': defines if the client should close after finish.-->
    <!--'RemoveDocumentFromRecentDocumentList': if 1, the Document (Workstep) is removed from the document list, when the workstep has been successfully synced with the server.-->
    <!--'CallClientActionOnlyAfterSuccessfulSync': if 1, the clientAction (Uri) is called, when the workstep has been synced with the server. if 0, the clientAction (Uri) is called, when the user pressed finish/reject - independently, if the server was reachable and returned ok.-->
    <ClientAction clientName="WSI" closeApp="0" RemoveDocumentFromRecentDocumentList="0" CallClientActionOnlyAfterSuccessfulSync="1">www.google.at</ClientAction>
  </FinishAction>
  <!--[DEPRECATED]DefaultWidth: The default signature width for parsed signature fields in points. Specify SigTemplate.width instead.-->
  <!--[DEPRECATED]DefaultHeight: The default signature height for parsed signature fields in points. Specify SigTemplate.height instead.-->
  <!--Configure the adhoc workstep creation-->
  <NoSequenceEnforced>0</NoSequenceEnforced>
  <!--A template for signature definitions.-->
  <SigTemplate>
    <!--The elements width in points-->
    <width>50.5</width>
    <!--The elements height in points-->
    <height>100.5</height>
  </SigTemplate>
  <!--Configuration for parsing the form fields. Possible values: '1' parse the form fields, '0' do not parse form fields-->
  <!--Attribute 'mapRequiredFieldsToRequiredTask': set the form filling task required when some of the fields are required. Possible values: '1' required forms lead to required tasks, '0' required fields do not enforce the task to be required-->
  <!--Attribute 'formsGrouping': Specify how the parsed forms should be grouped into tasks. Possible values: 'PerPage' all forms on one page are grouped to one forms group, 'PerDocument' all forms of one document are grouped to one forms group, 'PerEnvelope' all forms of all documents inside the envelope are grouped to one forms group-->
  <!--Attribute 'returnSimplifiedConfig': Possible values: '1' return minified form field information, '0' return full form field information-->
  <!--Attribute 'addKeepExistingValueFlag': Possible values: '1' CreateWorkstep will use the PDF defined form field value, '0' CreateWorkstep will use the XML defined form field value-->
  <ParseFormFields mapRequiredFieldsToRequiredTask="0" formsGrouping="PerPage" returnSimplifiedConfig="0" addKeepExistingValueFlag="0">1</ParseFormFields>
  <!--If the workstep is not generated by hand but automatically generated by the Workstep Controller AdhocPolicies are specified-->
  <AdhocPolicies>
    <!--Configure if any modifications, like adding attachments, freehand annotations are allowed after a signature is applied-->
    <AllowModificationsAfterSignature>1</AllowModificationsAfterSignature>
  </AdhocPolicies>
  <!--Configurate the signatures for this workstep. One default configuration has to be defined. The default configuration is used for flatten signatures, adhoc signatures and signature fields which do not reference a special signature plugin configuration. The default configuration does not contain the attribute 'spcId'. If the attribute 'spcId' is defined the signature plugin configuration does only apply to signature fields referencing the configuration by specifiying <param name="spcId">id</param>.-->
  <signaturePluginConfiguration>
    <!--Configurate the signature properties-->
    <PdfSignatureProperties_V1>
      <!--Should the signatures be pdfA conformant. Note this setting does not convert a document into pdfA, it only keeps it pdfA conformant if it already is. Possible values: '1' sign pdfA conformant - in this case the file size will be bigger than without pdfA, '0' do not sign pdfA conformant.-->
      <PdfAConformant>0</PdfAConformant>
      <!--Defines if the signature should be PAdES part 4 compliant. Possible values: '1' sign the document PAdES part 4 compliant, '0' sign the document with standard pdf signature. Default value: '0'-->
      <PAdESPart4Compliant>0</PAdESPart4Compliant>
      <!--Defines if the certificate chain for the signing certificate should be embedded into the signature. Possible values: '1' include the certificate chain, '0' do not include the certificate chain. Default value: '0'-->
      <IncludeSigningCertificateChain>0</IncludeSigningCertificateChain>
      <!--Defines if and how the revocation information for the signing certificate chain should be embedded. Possible values: 'DoNotInclude' no revocation information is included, 'Include' the revocation information has to be included, if not possible the signature throws an exception, 'TryToInclude' if the revocation information can be fetched, it should be included, if not the signature is done without revocation information. Information about the signatures where the revocation information could not be included is saved into the WorkstepStatus, 'CheckRevocationIncludeOcsp' the revocation information has to be included when it is an OCSP, if checking of the revocation (OCSP or CRL) fails an exception is thrown. Information about the signatures where the revocation information could not be included is saved into the WorkstepStatus-->
      <SigningCertificateRevocationInformationIncludeMode>DoNotInclude</SigningCertificateRevocationInformationIncludeMode>
    </PdfSignatureProperties_V1>
    <!--Configurate the cryptographic data-->
    <PdfSignatureCryptographicData_V1>
      <!--The hash algorithm used for the signatures. Possible values: 'Sha1', 'Sha256', 'Sha512'-->
      <SignatureHashAlgorithm>Sha256</SignatureHashAlgorithm>
      <!--The description of the signing certificate. More than one SigningCertificateDescriptor can be defined by adding this node more than once. If more SigningCertificateDescriptors are present, these configurations are used as backup if the selected SigningCertificateDescriptor is not working. For example if no revocation information can be retrieved although it should be included into the signature.-->
      <SigningCertificateDescriptor>
        <!--The certificates identifier-->
        <Identifier>14527a6bcfa8b4d7d0183fca6b735b1c246d14ae</Identifier>
        <!--The certificate identifier type. Possible values: 'Subject', 'Sha1Thumbprint'-->
        <Type>Sha1Thumbprint</Type>
        <!--The cryptographic service provider to locate the certificate. Possible values: 'default' uses the servers certificate store, 'custom' uses the custom signature action-->
        <Csp>Default</Csp>
      </SigningCertificateDescriptor>
    </PdfSignatureCryptographicData_V1>
  </signaturePluginConfiguration>
  <!--Configure the signature string parsing-->
  <SigStringParsingConfiguration>
    <!--Defines a signature string to parse. Tag can be present more than once-->
    <SigStringsForParsing>
      <!--The start pattern of the signature string if it has a start and end pattern. Otherwise the whole word to parse-->
      <StartPattern>`sig</StartPattern>
      <!--End pattern if needed, otherwise empty-->
      <EndPattern>`</EndPattern>
      <!--Define if the signature strings should be cleared from the document. Possible values: '1' remove the signature strings from the document, '0' do not change the document-->
      <ClearSigString>1</ClearSigString>
      <!--Define if only the entire word should be searched. For example if start pattern is 'signature' only 'signature' but not 'signaturepad' is found. This option does only effect signature string without end patterns. Possible values: '1' search only the entire word, '0' search words containing the pattern as well.-->
      <SearchEntireWordOnly>1</SearchEntireWordOnly>
    </SigStringsForParsing>
  </SigStringParsingConfiguration>
  <!--Defines general policies for this workstep-->
  <GeneralPolicies>
    <!--Is the client allowed to save the workstep document-->
    <AllowSaveDocument>1</AllowSaveDocument>
    <!--Is the client allowed to save the audittrail document-->
    <AllowSaveAuditTrail>0</AllowSaveAuditTrail>
    <!--Is the client allowed to rotate the pages of the document-->
    <AllowRotatingPages>1</AllowRotatingPages>
    <!--Is the client allowed to append a file to the workstep-->
    <AllowAppendFileToWorkstep>1</AllowAppendFileToWorkstep>
    <!--Is the client allowed to add append tasks to the workstep-->
    <AllowAppendTasksToWorkstep>1</AllowAppendTasksToWorkstep>
    <!--Is the client allowed to email the workstep document-->
    <AllowEmailDocument>0</AllowEmailDocument>
    <!--Is the client allowed to print the workstep document-->
    <AllowPrintDocument>0</AllowPrintDocument>
    <!--Is the client allowed to finish the workstep-->
    <AllowFinishWorkstep>1</AllowFinishWorkstep>
    <!--Is the client allowed to reject the workstep-->
    <AllowRejectWorkstep>1</AllowRejectWorkstep>
    <!--Is the client allowed to undo actions-->
    <AllowUndoLastAction>1</AllowUndoLastAction>
    <!--Is the client allowed to colorize pdf forms-->
    <AllowColorizePdfForms>0</AllowColorizePdfForms>
    <!--Is the client allowed to add adhoc attachments-->
    <AllowAdhocPdfAttachments>0</AllowAdhocPdfAttachments>
    <!--Is the client allowed to add signatures which are not defined in the tasks-->
    <AllowAdhocSignatures>1</AllowAdhocSignatures>
    <!--Is the client allowed to add stampings which are not defined in the tasks-->
    <AllowAdhocStampings>1</AllowAdhocStampings>
    <!--Is the client allowed to add adhoc freehand annotations-->
    <AllowAdhocFreeHandAnnotations>1</AllowAdhocFreeHandAnnotations>
    <!--Is the client allowed to add adhoc typewriter annotations-->
    <AllowAdhocTypewriterAnnotations>1</AllowAdhocTypewriterAnnotations>
    <!--Is the client allowed to add adhoc picture annotations-->
    <AllowAdhocPictureAnnotations>0</AllowAdhocPictureAnnotations>
    <!--Is the client allowed to append adhoc documents-->
    <AllowAdhocPdfPageAppending>0</AllowAdhocPdfPageAppending>
  </GeneralPolicies>
</AdhocWorkstepConfiguration>

  <prepareSendEnvelopeStepsDescriptor>
  <clearFieldMarkupString>1</clearFieldMarkupString>
</prepareSendEnvelopeStepsDescriptor>

<baseResult>ok</baseResult>
  <okInfo>
    <prepareSendEnvelopeStepsResult>
      <workstepConfiguration skipThirdPartyChecks="0">
        <WorkstepLabel>workstepLabel</WorkstepLabel>
        <SmallTextZoomFactorPercent>100</SmallTextZoomFactorPercent>
        <WorkstepTimeToLiveInMinutes>10</WorkstepTimeToLiveInMinutes>
        <FinishAction>
          <ServerAction callSynchronous="0">http://www.google.at</ServerAction>
          <ClientAction clientName="WSI" closeApp="0" RemoveDocumentFromRecentDocumentList="0" CallClientActionOnlyAfterSuccessfulSync="1">www.google.at</ClientAction>
        </FinishAction>
        <signatureTemplate>
          <version>1.2.0.2</version>
          <positionUnits>PdfUnits</positionUnits>
          <positionReferenceCorner>Lower_Left</positionReferenceCorner>
        </signatureTemplate>
        <pdfForms isEditingAllowed="1" />
        <ViewerPreferences>
          <SendVisibleArea allowedDomain="*">0</SendVisibleArea>
        </ViewerPreferences>
        <Policy version="1.1.0.0">
          <GeneralPolicies>
            <AllowSaveDocument>1</AllowSaveDocument>
            <AllowSaveAuditTrail>0</AllowSaveAuditTrail>
            <AllowRotatingPages>1</AllowRotatingPages>
            <AllowAppendFileToWorkstep>1</AllowAppendFileToWorkstep>
            <AllowAppendTasksToWorkstep>1</AllowAppendTasksToWorkstep>
            <AllowEmailDocument>0</AllowEmailDocument>
            <AllowPrintDocument>0</AllowPrintDocument>
            <AllowFinishWorkstep>1</AllowFinishWorkstep>
            <AllowRejectWorkstep>1</AllowRejectWorkstep>
            <AllowRejectWorkstepDelegation>0</AllowRejectWorkstepDelegation>
            <AllowUndoLastAction>1</AllowUndoLastAction>
            <AllowColorizePdfForms>0</AllowColorizePdfForms>
            <AllowReloadOfFinishedWorkstep>1</AllowReloadOfFinishedWorkstep>
            <AllowAdhocPdfAttachments>0</AllowAdhocPdfAttachments>
            <AllowAdhocSignatures>1</AllowAdhocSignatures>
            <AllowAdhocStampings>1</AllowAdhocStampings>
            <AllowAdhocFreeHandAnnotations>1</AllowAdhocFreeHandAnnotations>
            <AllowAdhocTypewriterAnnotations>1</AllowAdhocTypewriterAnnotations>
            <AllowAdhocPictureAnnotations>0</AllowAdhocPictureAnnotations>
            <AllowAdhocPdfPageAppending>0</AllowAdhocPdfPageAppending>
          </GeneralPolicies>
          <WorkstepTasks SequenceMode="SequenceOnlyRequiredTasks" />
          <AdhocPolicies>
            <AllowModificationsAfterSignature>1</AllowModificationsAfterSignature>
          </AdhocPolicies>
        </Policy>
        <timeCreated>2019-10-14T11:17:00.8971613Z</timeCreated>
        <signaturePluginConfiguration>
    <!--Configurate the signature properties-->
    <PdfSignatureProperties_V1>
      <!--Should the signatures be pdfA conformant. Note this setting does not convert a document into pdfA, it only keeps it pdfA conformant if it already is. Possible values: '1' sign pdfA conformant - in this case the file size will be bigger than without pdfA, '0' do not sign pdfA conformant.-->
      <PdfAConformant>0</PdfAConformant>
      <!--Defines if the signature should be PAdES part 4 compliant. Possible values: '1' sign the document PAdES part 4 compliant, '0' sign the document with standard pdf signature. Default value: '0'-->
      <PAdESPart4Compliant>0</PAdESPart4Compliant>
      <!--Defines if the certificate chain for the signing certificate should be embedded into the signature. Possible values: '1' include the certificate chain, '0' do not include the certificate chain. Default value: '0'-->
      <IncludeSigningCertificateChain>0</IncludeSigningCertificateChain>
      <!--Defines if and how the revocation information for the signing certificate chain should be embedded. Possible values: 'DoNotInclude' no revocation information is included, 'Include' the revocation information has to be included, if not possible the signature throws an exception, 'TryToInclude' if the revocation information can be fetched, it should be included, if not the signature is done without revocation information. Information about the signatures where the revocation information could not be included is saved into the WorkstepStatus, 'CheckRevocationIncludeOcsp' the revocation information has to be included when it is an OCSP, if checking of the revocation (OCSP or CRL) fails an exception is thrown. Information about the signatures where the revocation information could not be included is saved into the WorkstepStatus-->
      <SigningCertificateRevocationInformationIncludeMode>DoNotInclude</SigningCertificateRevocationInformationIncludeMode>
    </PdfSignatureProperties_V1>
    <!--Configurate the cryptographic data-->
    <PdfSignatureCryptographicData_V1>
      <!--The hash algorithm used for the signatures. Possible values: 'Sha1', 'Sha256', 'Sha512'-->
      <SignatureHashAlgorithm>Sha256</SignatureHashAlgorithm>
      <!--The description of the signing certificate. More than one SigningCertificateDescriptor can be defined by adding this node more than once. If more SigningCertificateDescriptors are present, these configurations are used as backup if the selected SigningCertificateDescriptor is not working. For example if no revocation information can be retrieved although it should be included into the signature.-->
      <SigningCertificateDescriptor>
        <!--The certificates identifier-->
        <Identifier>14527a6bcfa8b4d7d0183fca6b735b1c246d14ae</Identifier>
        <!--The certificate identifier type. Possible values: 'Subject', 'Sha1Thumbprint'-->
        <Type>Sha1Thumbprint</Type>
        <!--The cryptographic service provider to locate the certificate. Possible values: 'default' uses the servers certificate store, 'custom' uses the custom signature action-->
        <Csp>Default</Csp>
      </SigningCertificateDescriptor>
    </PdfSignatureCryptographicData_V1>
  </signaturePluginConfiguration>
        <TransactionCodeConfigurations>
          <TransactionCodeConfiguration trConfId="smsAuthTransactionCodeId">
       
          </TransactionCodeConfiguration>
        </TransactionCodeConfigurations>
      </workstepConfiguration>
      <steps>
        <step>
          <emailBodyExtra></emailBodyExtra>
          <orderIndex>1</orderIndex>
          <recipientType>Signer</recipientType>
          <useDefaultAgreements>false</useDefaultAgreements>
          <workstepConfiguration skipThirdPartyChecks="0">
            <WorkstepLabel>workstepLabel</WorkstepLabel>
            <SmallTextZoomFactorPercent>100</SmallTextZoomFactorPercent>
            <WorkstepTimeToLiveInMinutes>10</WorkstepTimeToLiveInMinutes>
            <FinishAction>
              <ServerAction callSynchronous="0">http://www.google.at</ServerAction>
              <ClientAction clientName="WSI" closeApp="0" RemoveDocumentFromRecentDocumentList="0" CallClientActionOnlyAfterSuccessfulSync="1">www.google.at</ClientAction>
            </FinishAction>
            <ViewerPreferences>
              <SendVisibleArea allowedDomain="*">0</SendVisibleArea>
            </ViewerPreferences>
            <Policy version="1.1.0.0">
              <GeneralPolicies>
                <AllowSaveDocument>1</AllowSaveDocument>
                <AllowSaveAuditTrail>0</AllowSaveAuditTrail>
                <AllowRotatingPages>1</AllowRotatingPages>
                <AllowAppendFileToWorkstep>1</AllowAppendFileToWorkstep>
                <AllowAppendTasksToWorkstep>1</AllowAppendTasksToWorkstep>
                <AllowEmailDocument>0</AllowEmailDocument>
                <AllowPrintDocument>0</AllowPrintDocument>
                <AllowFinishWorkstep>1</AllowFinishWorkstep>
                <AllowRejectWorkstep>1</AllowRejectWorkstep>
                <AllowRejectWorkstepDelegation>0</AllowRejectWorkstepDelegation>
                <AllowUndoLastAction>1</AllowUndoLastAction>
                <AllowColorizePdfForms>0</AllowColorizePdfForms>
                <AllowReloadOfFinishedWorkstep>1</AllowReloadOfFinishedWorkstep>
                <AllowAdhocPdfAttachments>0</AllowAdhocPdfAttachments>
                <AllowAdhocSignatures>1</AllowAdhocSignatures>
                <AllowAdhocStampings>1</AllowAdhocStampings>
                <AllowAdhocFreeHandAnnotations>1</AllowAdhocFreeHandAnnotations>
                <AllowAdhocTypewriterAnnotations>1</AllowAdhocTypewriterAnnotations>
                <AllowAdhocPictureAnnotations>0</AllowAdhocPictureAnnotations>
                <AllowAdhocPdfPageAppending>0</AllowAdhocPdfPageAppending>
              </GeneralPolicies>
              <AdhocPolicies>
                <AllowModificationsAfterSignature>1</AllowModificationsAfterSignature>
              </AdhocPolicies>
              <WorkstepTasks originalSequenceMode="NoSequenceEnforced" SequenceMode="NoSequenceEnforced">
                <Task id="17006562-45c4-4ab2-83f9-2333bada59c2" DocRefNumber="1" enabled="1" completed="0" type="FillFormsGroup" required="1" displayName="" />
              </WorkstepTasks>
            </Policy>
            <timeCreated>2019-10-14T11:17:00.8971613Z</timeCreated>
            <signaturePluginConfiguration>
    <!--Configurate the signature properties-->
    <PdfSignatureProperties_V1>
      <!--Should the signatures be pdfA conformant. Note this setting does not convert a document into pdfA, it only keeps it pdfA conformant if it already is. Possible values: '1' sign pdfA conformant - in this case the file size will be bigger than without pdfA, '0' do not sign pdfA conformant.-->
      <PdfAConformant>0</PdfAConformant>
      <!--Defines if the signature should be PAdES part 4 compliant. Possible values: '1' sign the document PAdES part 4 compliant, '0' sign the document with standard pdf signature. Default value: '0'-->
      <PAdESPart4Compliant>0</PAdESPart4Compliant>
      <!--Defines if the certificate chain for the signing certificate should be embedded into the signature. Possible values: '1' include the certificate chain, '0' do not include the certificate chain. Default value: '0'-->
      <IncludeSigningCertificateChain>0</IncludeSigningCertificateChain>
      <!--Defines if and how the revocation information for the signing certificate chain should be embedded. Possible values: 'DoNotInclude' no revocation information is included, 'Include' the revocation information has to be included, if not possible the signature throws an exception, 'TryToInclude' if the revocation information can be fetched, it should be included, if not the signature is done without revocation information. Information about the signatures where the revocation information could not be included is saved into the WorkstepStatus, 'CheckRevocationIncludeOcsp' the revocation information has to be included when it is an OCSP, if checking of the revocation (OCSP or CRL) fails an exception is thrown. Information about the signatures where the revocation information could not be included is saved into the WorkstepStatus-->
      <SigningCertificateRevocationInformationIncludeMode>DoNotInclude</SigningCertificateRevocationInformationIncludeMode>
    </PdfSignatureProperties_V1>
    <!--Configurate the cryptographic data-->
    <PdfSignatureCryptographicData_V1>
      <!--The hash algorithm used for the signatures. Possible values: 'Sha1', 'Sha256', 'Sha512'-->
      <SignatureHashAlgorithm>Sha256</SignatureHashAlgorithm>
      <!--The description of the signing certificate. More than one SigningCertificateDescriptor can be defined by adding this node more than once. If more SigningCertificateDescriptors are present, these configurations are used as backup if the selected SigningCertificateDescriptor is not working. For example if no revocation information can be retrieved although it should be included into the signature.-->
      <SigningCertificateDescriptor>
        <!--The certificates identifier-->
        <Identifier>14527a6bcfa8b4d7d0183fca6b735b1c246d14ae</Identifier>
        <!--The certificate identifier type. Possible values: 'Subject', 'Sha1Thumbprint'-->
        <Type>Sha1Thumbprint</Type>
        <!--The cryptographic service provider to locate the certificate. Possible values: 'default' uses the servers certificate store, 'custom' uses the custom signature action-->
        <Csp>Default</Csp>
      </SigningCertificateDescriptor>
    </PdfSignatureCryptographicData_V1>
  </signaturePluginConfiguration>
            <TransactionCodeConfigurations>
              <TransactionCodeConfiguration trConfId="smsAuthTransactionCodeId">
             
              </TransactionCodeConfiguration>
            </TransactionCodeConfigurations>
            <pdfForms isEditingAllowed="0">
              <pdfFormsGroup id="17006562-45c4-4ab2-83f9-2333bada59c2">
                <textBox id="myText1">
                  <DocRefNumber>1</DocRefNumber>
                  <isRequired>1</isRequired>
                  <positionPage>1</positionPage>
                  <positionX>72</positionX>
                  <positionY>563</positionY>
                  <width>200</width>
                  <height>65.15</height>
                </textBox>
                <checkBox id="chk1">
                  <requiredEvalPolicy>IsChecked</requiredEvalPolicy>
                  <DocRefNumber>1</DocRefNumber>
                  <isRequired>1</isRequired>
                  <positionPage>1</positionPage>
                  <positionX>72</positionX>
                  <positionY>440</positionY>
                  <width>25</width>
                  <height>25</height>
                </checkBox>
              </pdfFormsGroup>
            </pdfForms>
            <TypewriterAnnotationTaskInfo />
            <attachmentFields />
            <signatureTemplate>
              <version>1.2.0.2</version>
              <positionReferenceCorner>Lower_Left</positionReferenceCorner>
              <positionUnits>PdfUnits</positionUnits>
            </signatureTemplate>
          </workstepConfiguration>
          <recipients>
            <recipient>
              <eMail>placeholder1@placeholder1.com</eMail>
              <emailBodyExtra></emailBodyExtra>
              <firstName>placeholder1</firstName>
              <lastName>placeholder1</lastName>
              <languageCode>en</languageCode>
              <disableEmail>false</disableEmail>
              <skipExternalDataValidation>false</skipExternalDataValidation>
              <addAndroidAppLink>false</addAndroidAppLink>
              <addIosAppLink>false</addIosAppLink>
              <addWindowsAppLink>false</addWindowsAppLink>
              <allowDelegation>true</allowDelegation>
              <authentications />
            </recipient>
          </recipients>
        </step>
      </steps>
      <addFormFields>
        <document docRef="1">
          <textBox name="myText1" readOnly="false" required="true" x="72" y="563.477001953125" width="200" height="65.149999999999991" page="1">
            <fontSettings>
              <textColor>#FF0000</textColor>
              <fontName>Arial</fontName>
              <fontSize>12</fontSize>
              <fontStyleBold>false</fontStyleBold>
              <fontStyleItalic>false</fontStyleItalic>
              <textAlign>Center</textAlign>
            </fontSettings>
            <value>Place for signer1</value>
            <maxLength>100</maxLength>
            <isMultiLine>false</isMultiLine>
            <isPassword>false</isPassword>
            <isFileSelect>false</isFileSelect>
            <isScrollAllowed>false</isScrollAllowed>
            <isComb>false</isComb>
          </textBox>
          <checkBox name="chk1" readOnly="false" required="true" x="72" y="439.802001953125" width="25" height="25" page="1">
            <isChecked>true</isChecked>
          </checkBox>
        </document>
      </addFormFields>
    </prepareSendEnvelopeStepsResult>
  </okInfo>